Список диспетчеров

Этот изменяющийся в размерах список, может быть размещен в любом положении на экране по усмотрению пользователя. Он показывает информацию о диспетчерах в районе Вашего центра видимости.

Верхняя панель списка позволяет фильтровать какие позиции диспетчеров будут отображаться в данном списке. Нажав на кнопочку на панели, Вы включите отображение определенного типа позиции.

F - отображение FSS (Flight Service Stations) позиций.
C - отображение CTR (Center = РЦ) позиций.
A - отображение APP (Approach = Подход) позиций.
T - отображение TWR (Tower = Вышка) позиций.
G - отображение GND (Ground = Руление) позиций.
S - отображение ATIS позиций.
O - отображение OBS (Observers = Наблюдатели) позиций.
U - отображение неопознанных позиций.

For each position, the following items are displayed in the Controller list:

Ground to ground communication status
Ongoing coordination flag indicating that the controller uses radar client that is ready for ongoing coordination.
The position identifier as defined in the ese file.
The complete callsign.

The color of the controller means:

yellow - normally;
pink - when leaving shortly;
white - when no position update in the last 30 seconds and they are assumed to be disconnected.

With a left single click on any position in the list a detailed data is copied to the message area. With a doubleclick you can open a chat window with the controller.

With a right click a special popup menu appears that shows the following items:

Listen to frequency - using this item a normal voice connection to the controller's frequency is added to the voice dialog, where only voice receiving is selected. In addition you can set transmission manually.
Leave frequency - to quickly disconnect from the controllers main frequency channel
Get ATIS - this item calls for the actual ATIS of the controller, the answer will be shown as private message in the chat area,
Intercom - it starts a bilateral communication, where your secondary input and output hardwares are used (for transmission use your secondary PTT)
Override - for the caller it works exactly like an intercom call (transmits on the secondary output device, with the secondary PTT), for the receiving unit voice comes on his secondary output, to transmit there is no need to press the PTT secondary voice input and the communication on the primary frequency is trasmitted to the other party.
Monitor - listen to the selected controller's frequency, without having the opportunity to transmit on the frequency
Accept - to accept an external ground-to-ground communication call
Refuse - to refuse an external ground-to-ground communication call
Disconnect - to close the active landline connection