#GoodWay v3.1.2
#Tue Nov 08 02:38:24 CEST 2005
#values in USG, ft, nm and knots groundspeed
cruise_speed=443
descent_rate=3000
descent_speed=300
plane_constructor=Boeing Industries
xplane_certified=815+
author=Benedikt Stratmann
cruise_altitude=41000
plane_type=737-700
max_seats=131
plane_full_name=B737-700 LN-RPK
release_date=DEC 01 2005
fuel_max_onboard=6875
climb_speed=300
plane_compagny=HOOTERS air
release=1
fuel_max_consumption_hour=474
author_web=x-plane.benedikt-stratmann.de
maximum_range=4400
climb_rate=2000

#Sa May 08 11:31:02 CET 2005
###
# Added for CP
takeoff_flaps=1
takeoff_flaps_heavy=3
takeoff_flaps_heavy_threshold=155000
landing_flaps=6
###
# Optional equipment
HasRadarAltimeter=TRUE
# 0=none, 1=FMS/GPS, 2=Basic
AutoPilotType=0
###
# Text checklist items
# Separate the left hand and right hand text with a ':' and do
# not add extra space before/after ':'
CL_SafetyCheck=Parking_Brake:Set
CL_SafetyCheck=Landing_Gear:Down
CL_SafetyCheck=Throttle:0
CL_SafetyCheck=Switches:Off
#
CL_B4GateDeparture=Doors and slides:Green, Armed
CL_B4GateDeparture=Notify SAS dispatcher:CHECK
CL_B4GateDeparture=Battery:ON
CL_B4GateDeparture=Avionics:ON
CL_B4GateDeparture=APU:START & ON BUS
CL_B4GateDeparture=GND_Power:OFF
CL_B4GateDeparture=Tail_Logo_Light:AS NEEDED
CL_B4GateDeparture=GND:Req Pushback
#
CL_B4Start=Parking_Brake:SET
CL_B4Start=Emergency_Lights:Armed
CL_B4Start=Throttle:IDLE
CL_B4Start=Fuel_Cutoff:OFF
CL_B4Start=Fuel_Selector:CTR TANK
CL_B4Start=De_Icing:OFF
CL_B4Start=Pressurization:Auto
CL_B4Start=Hydraulics:Set
CL_B4Start=Magnetic_compass:CHECK
CL_B4Start=Auto_Pilot:OFF
CL_B4Start=Trim_Elevator:Set Neutral
CL_B4Start=Flaps:0
CL_B4Start=Speedbrake:0
#
CL_B4Taxi=ECAM Status:Checked
CL_B4Taxi=Generator:ON
CL_B4Taxi=Inverter:ON
CL_B4Taxi=APU:OFF BUS & STOP
CL_B4Taxi=Window_heat:ON
CL_B4Taxi=Pitot_heat:ON
CL_B4Taxi=Engine_heat:ON
CL_B4Taxi=Yaw_Damper:ON
CL_B4Taxi=Radar Altimeter:CHECK ZERO
CL_B4Taxi=Altimeter:ATIS
CL_B4Taxi=TWR:Request TAXI
CL_B4Taxi=Parking_Brake:OFF
#
CL_Takeoff=Engine_Mode:TO
CL_Takeoff=Trim_Elevator:CHECK
CL_Takeoff=TWR:Request Take Off
#
CL_Climb=PACKS:CHECK
CL_Climb=De_Icing:AS NEEDED
CL_Climb=Engine_Mode_Selector:CHECK
CL_Climb=Elevator_Trim:CHECK
CL_Climb=ATC:Departure
#
CL_Descent=ATC:ATIS
CL_Descent=Wing_Heat:AS NEEDED
CL_Descent=Engine_heat:ON
CL_Descent=Pitot_heat:ON
CL_Descent=Window_heat:ON
CL_Descent=Vref:CHECK
#
CL_FinalLandingItems=Engine_Mode:G/A
CL_FinalLandingItems=SpeedBrake:ARMED
CL_FinalLandingItems=ParkingBrake:OFF
CL_FinalLandingItems=Flaps:CHECK 30
#
CL_AfterLanding=Strobe:OFF
CL_AfterLanding=Anti_Ice:OFF
CL_AfterLanding=APU:START
#
CL_AfterParking=APU/GND:ON BUS
CL_AfterParking=Parking_Brake:SET
CL_AfterParking=Emergency_Lights:OFF
CL_AfterParking=Throttle:IDLE
CL_AfterParking=Fuel_Cutoff:ON
CL_AfterParking=Fuel_Selector:CTR TANK
CL_AfterParking=De_Icing:OFF
CL_AfterParking=Pressurization:OFF
CL_AfterParking=Auto_Pilot:OFF
CL_AfterParking=Trim_Elevator:Set Neutral
CL_AfterParking=Flaps:0
CL_AfterParking=Speedbrake:0
###
#
# Set V1, Vr and V2 for all possible flap settings (detents)
# Set the minimum and maximum airspeeds which are automatically
# mapped to the empty and max weights of the airplane
# Index is the flap detent, value is the KIAS
# Not all of the flap detents really make sense for takeoff
# but we can't anticipate all conditions so they should all
# be here.  You can have many [...]
V1Min[0]=165
V1Max[0]=175
V1Min[1]=97
V1Max[1]=143
V1Min[2]=94
V1Max[2]=140
V1Min[3]=92
V1Max[3]=134
V1Min[4]=91
V1Max[4]=132
V1Min[5]=90
V1Max[5]=131
V1Min[6]=90
V1Max[6]=131
V1Min[7]=30
V1Max[7]=131
VrMin[0]=167
VrMax[0]=175
VrMin[1]=101
VrMax[1]=146
VrMin[2]=98
VrMax[2]=142
VrMin[3]=97
VrMax[3]=135
VrMin[4]=95
VrMax[4]=132
VrMin[5]=94
VrMax[5]=131
VrMin[6]=94
VrMax[6]=131
VrMin[7]=94
VrMax[7]=131
V2Min[0]=114
V2Max[0]=152
V2Min[1]=111
V2Max[1]=148
V2Min[2]=109
V2Max[2]=141
V2Min[3]=107
V2Max[3]=138
V2Min[4]=106
V2Max[4]=136
V2Min[5]=105
V2Max[5]=135
V2Min[6]=104
V2Max[6]=134
V2Min[7]=103
V2Max[7]=133
# ------------------------------------------------
# Speed Climb (VVI and Speed)
# ------------------------------------------------
# VVI and speed are automatically set by CoPilot by Levels/Steps. (Note the
# [1] is AGL, the other are Feet). You can have many [...]
speedclimbaltbottom[0]=0
speedclimbaltup[0]=2000
speedclimbspeedvvi[0]=2800
speedclimbspeed[0]=220
speedclimbaltbottom[1]=2000
speedclimbaltup[1]=5000
speedclimbspeedvvi[1]=3500
speedclimbspeed[1]=250
speedclimbaltbottom[2]=5000
speedclimbaltup[2]=10000
speedclimbspeedvvi[2]=2800
speedclimbspeed[2]=250
speedclimbaltbottom[3]=10000
speedclimbaltup[3]=20000
speedclimbspeedvvi[3]=2400
speedclimbspeed[3]=270
speedclimbaltbottom[4]=20000
speedclimbaltup[4]=29000
speedclimbspeedvvi[4]=1800
speedclimbspeed[4]=250
speedclimbaltbottom[5]=29000
speedclimbaltup[5]=37000
speedclimbspeedvvi[5]=1400
speedclimbspeed[5]=240
speedclimbaltbottom[5]=37000
speedclimbaltup[5]=41000
speedclimbspeedvvi[5]=900
speedclimbspeed[5]=220
# ------------------------------------------------
# Speed Descent (VVI and Speed)
# ------------------------------------------------
# VVI and speed are automatically set by CoPilot by Levels/Steps. (Note the
# [1] is AGL, the other are Feet). You can have many [...]
speeddescentaltbottom[0]=0
speeddescentaltup[0]=3000
speeddescentspeedvvi[0]=-1200
speeddescentspeed[0]=130
speeddescentaltbottom[1]=3000
speeddescentaltup[1]=5000
speeddescentspeedvvi[1]=-1600
speeddescentspeed[1]=230
speeddescentaltbottom[2]=5000
speeddescentaltup[2]=12000
speeddescentspeedvvi[2]=-2000
speeddescentspeed[2]=250
speeddescentaltbottom[3]=12000
speeddescentaltup[3]=41000
speeddescentspeedvvi[3]=-2200
speeddescentspeed[3]=290