_________________________________

AIRBUS A300 B4-2C
         _________________________________

AIRBUS A300 B4-2C
 PANEL
v 3.0  for MS Flight Simulator 2004

1024 X 768 resolution prefered


(Freeware - Benoоt Gaurant - France - 08-2004)


from a fly dynamic by Franck Weiss
__________________________________________________________________________________________________
SPECIALY TUNED FOR THE SGA A300 PLANE WITH THE AIRCRAFT.CFG AND .AIR FILE INCLUDED IN THIS ARCHIVE
__________________________________________________________________________________________________
INS CIVA IV of Marco Ravanello NEEDED (not included in this archive)
(download them from www.SimuFly.com/ins)
__________________________________________________________________________________________________
         _________________________________
NEWS BETWEEN VERSION 3.0 AND VERSION (v2.0) + PATCH2004 :

1- Correction of brake problems when loading the aircraft from the "create a flight" menu.

   It is yet recommended not to load the plane from the "create a flight" menu but rather from a default fs9 already loaded
(B737 for instance), gauge programs are better loaded this way with fs9.
   I have no explaination why fs9 load differently the .gau file from one way to another).
   Better proceed one of the folowing ways :
 - either "create a flight" choosing the default B737 and once the the flight is loaded, select the A300 in the "aircraft" menu.
 - or "save" a situation with the B737 (at gate with engines off for instance). Choose this flight in the menu "select a flight" and then load the A300 from the "aircraft" menu once the situation is loaded.

2- Bugs corrections between the 2 altimeters.
   Possibility to set more precisely the barometric pressure thanks to 2 clic areas.

3- VOR1 needle no more points to ILS (VOR needles only point to VOR).

4- Flaps, Landing Lights, doors and LOGO lights work in association with the A300 plane made by SGA (cargo door will work only if YELLOW hydraulic circuit is ON).

5- Fuel quantities indications units depend on the setting of FS9.
   If U.S. system is choosen, indications will be in LBS, if one of the 2 other modes is choosen, indications will be in KGS.

6- Ability to listen to 2 different COM frequencies (COM1+COM2 to be able to hear ATIS while following ATC)

7- Connection between AP/FD and Marco Ravanello's INS CIVA IV v1.20.
   INS1 (left) is connected to AP/FD1, INS2 (right) is connected to AP/FD2 thanks to a new switch added in front of the pilot.
   If this swicth is set to INS, AP/FD (when in VL mode) will follow the flight points entered in the corresponding INS.

   (read carefully the authors' documentation for a correct use of those INS).

8- Custom made fly dynamics based on Franck Weiss one, for more realistic performances (even if not perfect yet).

9- For visual approaches (VFR), the Mini Panel mode (press "W" key) now displays the main A300 instruments.

         _________________________________

Put the a300b4_SGA_3 folder in FS9 \ Aircraft folder.
Put the a300bgt3.gau file in FS9 \ Gauges folder.
Put the DC10logo.fx file in FS9 \ Effects folder.
Downlaod and install MarcoRavanello's iNS CIVA IV (from www.SimuFly.com/ins).
In FS9, the plane will appear in the sub-menu AIRBUS


!!! IT IS STRONGLY RECOMMENDED TO READ THE DOCUMENTATION BEFORE USING THIS PANEL !!!

For the documentation (in english) about the panel, download and unzip the following file :
a3003gb.zip
(from www.flightsim.com or www.avsim.com)

For the engine and warning sounds to associate to this panel, download and unzip the following file :
a3bgtsnd.zip
(from www.flightsim.com or www.avsim.com)



         _________________________________

   THIS PANEL, THE INCLUDED PLANE AND FLY DYNAMIC ARE STRICTLY FREEWARE, USING THIS PANEL OR PARTS OF IT OR THE INCLUDED PLANE FOR COMMERCIAL BUSINESS (EVEN SHAREWARE) IS FORBIDDEN.

FOR ANY MODIFICATIONS OR UPLOADS, PERMISSION OF THE AUTHORS IS REQUIRED.I ACCEPT NO RESPONSABILITY IN ANY DAMAGE RESULTING FROM USING THOSE FILES.
         _________________________________


Benoоt Gaurant
France
[email protected]